Sharp 8A-C22CX1 Operation Manual page 12

System connections (continued)
■ Connecting a TV, or DVD player, etc.
TV
To audio output
terminals
To HEADPHONE
terminal
OR
Audio cable
(commercially
available)
To AUDIO IN
terminals
Press the INPUT button repeatedly on the sound bar or OPTICAL or AUDIO IN on remote control to select "OPTICAL"
or " AUDIO IN".
Caution:
● When connected to the headphone terminal of a monaural TV, sound may not be output from both left or right front
speaker.
■ Comments on the HDMI cable
● If a protective cap is attached to the connector, please make sure to remove the cap before connecting.
● Please purchase a commercially available HDMI cable.
● When using commercially available HDMI cable, please purchase the HDMI cable compatible with Ethernet standard,
high speed type with HDMI logo, of a length 2 m or less to prevent more stable operation and deterioration of image
quality.
● Plug the HDMI connector all the way into the socket and do not pull it. If the connector comes out of the terminal, the
unit will not operate properly. Also, when it is not tightly inserted, the image may be blurred or noise may be generated.
■ Comments on the optical audio cable
● If a protective cap is attached to the connector, please make sure to remove the cap before connecting.
● The optical digital audio cable can be damaged if it is bent too strongly. Please do not bend it below 60 mm diameter.
Video
input
To optical
OR
digital audio
output
terminal
Optical digital
audio cable
Video cable
Video
output
To optical
digital audio
output
terminal
To OPTICAL IN
(optical) input terminal
E-11
Blu-ray, DVD disc
player or similar
OR
To audio output
terminals
OR
Optical digital
audio cable
To OPTICAL IN
input terminal
Audio cable
(commercially
available)
To AUDIO IN
terminals