Installation in Aircraft
This child restraint is certified for aircraft use . Most airlines in
the U .S . and Canada will allow the use of a child restraint, if it
is labeled as an approved child restraint for airline use and fits
properly on the plane . Contact the airline about their policy prior
to traveling .
• Place the child restraint next to a
window to avoid blocking the aisle .
• If the aircraft lap belt is too short,
ask the flight attendant for a belt
extender .
Rear-Facing Installation
For rear-facing aircraft installation (Fig.
A), follow instructions on pages 14–15 .
Forward-Facing Installation
For forward-facing aircraft installation
(Fig. B), follow instructions on page 20 .
22
A
B
WARNING:
WHEN U SING T HE R ESTRAINT I N F ORWARD-
FACING MODE, ATTACH THE VERSA-TETHER
TO TETHER ANCHORS IDENTIFIED BY THE VEHICLE
MANUFACTURER AS TETHER-ANCHORAGE POINTS .
USE OF OTHER LOCATIONS IS NOT APPROVED OR
PERMITTED .
•
Britax
recommends that the tether be used at all times . Using the
®
tether will improve the stability of the child restraint and reduce
the risk of injury .
•
If the vehicle does not currently have a tether anchor attachment,
refer to the vehicle's owner's manual or contact the vehicle man-
ufacturer for assistance .
•
If a tether anchorage is not available, DO NOT modify the vehicle
without advice from the vehicle manufacturer .
•
D O NOT hook the Versa-Tether
seat adjuster!
•
U se of the tether in rear-facing installations is optional but its
use will improve the stability of the child seat .
•
Always store excess tether webbing in the tether-storage
pouch .
•
Always store tether in tether-storage pouch when not in use .
Versa-Tether
®
ONLY
to the bottom of a vehicle
®
®
23