ZyXEL Communications USG Series Vpn Configuration Manual page 9

Gateway Settings
My Address​ : Select ​ I nterface​ and select your primary ​ W AN​ network interface (here: ​ w an1​ ) from the pop-up menu
➔
Peer Gateway Address​ : Select ​ D ynamic Address
➔
Authentication
Enter a ​ P re-Shared Key​ (here: ​ t opsecret​ ) . Make sure to choose a good pre-shared key and remember it, or write it down as​
➔
Local ID Type​ : Make sure ​ I P​ is selected
➔
Content​ : Leave the default of ​ 0 .0.0.0​ . This means that the IP address entered for ​ M y Address​ will automatically be used as the device's identifier
➔
Peer ID Type​ : Make sure ​ A ny​ is selected. This means that connecting VPN clients can use any identifier type
➔
5 )
​ ( ​
8