Application Scenario : Select R emote Access (Server Role)
➔
VPN Gateway : Choose the phase 1 (VPN gateway) setup you created in S tep 4 (here: vpn_tracker ) from the pop-up
➔
Policy
Local policy : Choose the address object corresponding to the network(s) VPN clients are permitted to access. Here, L AN1_SUBNET , i.e. the ZyWALL's LAN network ( 2) ,
➔
is being used. This selection will be appropriate in most cases.
Select the checkbox P olicy Enforcement to restrict VPN client access to the network(s) chosen under L ocal Policy