Installation Notes - Ingenico iSC Touch 250 Manual

Revision History
Document Version
1.0

Installation Notes:


The merchant is responsible for contacting their Reseller and obtaining a Merchant Number, as
well as having a Deployment ID created on DataCap's PSCS Server prior to installation.

Note: You must be running CRE/RPE version 12.8031 or higher to use this device. To install the
required version of CRE/RPE Windows 7 or above is required.

The NETePay software only needs to be installed on 1 station which will act as the DataCap
server.

It is recommended to install the NETePay Software on a back office computer that can act as a
server.

The ISC TOUCH 250 driver, dsiPDCX software, and dsiEMVUS software needs to be installed on
each station that will process card payments.

The credit card settlement only needs to be run once from one station.

Device encryption is configured by the processor prior to deployment.

The receipt option Suppress Extra Signature Copy is unavailable due to requirements of the
Datacap Platform
Date
January 18, 2018
Author Description of Changes
MP 1st Release
3