Configuring Cre/Rpe - Ingenico iSC Touch 250 Manual

Configuring CRE/RPE (required on each PC that will process card payments)
1. Go to Options/Manager > Setup >
Setup Screen.
2. Select Payment Processing
3. Select Credit/Debit
4. Select Datacap from the Payment
Processor dropdown
5. Select Chase Paymentech from the
Processing Company dropdown
6. Enter the IP address of the PC acting
as the NETePay server
7. Select Ingenico iSCT250 from the
Pinpad dropdown.
8. Enter the # of the COM port
configured in the Device Manager
9. Enter the Merchant # associated with
the Chase Paymentech processing
account.
10. Enter the Terminal Number if
provided.
11. Select Update
12. Restart CRE
13. When CRE opens to the login screen,
wait for the PINpad to initialize. It will
display LOADING and then restart
itself before displaying WELCOME
again when it is ready.
21