Table of Contents
Advertisement
Table of contents
6.4.3
Setting up a connection using data goggles
Requirement
•
The SIPIX MO/SD ZN tablet is registered in the cRSP and approved for remote
support use.
•
The SIPIX MO/SD ZN tablet and the data glasses are on the same network
with the same network ID.
Procedure
1. Start "SIPIX RC" on the SIPIX Tablet.
2. Start the data glasses via the power button
3. Open the browser via the application view on the data glasses.
4. Call the IPv4 address of the SIPIX tablet (https://xxx.xxx.xxx.xxx:5001/bt).
5. Allow access to the camera and microphone.
The data goggles are connected to the SIPIX MO/SD ZN.
For more information on operating the BT view, see Section 6.5.4.
Note
During use, activate the key lock on the data goggles.
Press and hold the left button of the tracking pad.
SIPIX MO/SD ZN
Entry-ID: 109792654, 04/2021
60
Advertisement
Table of Contents
