Odours - Siemens KI25R Series Instructions For Use Manual

Notes
Regularly clean the condensation
■
channels and drainage hole, Fig. 9,
with a cotton bud or similar implement
to ensure that the condensation can
drain.
After cleaning, the stopper must be re-
■
inserted into the drainage hole
of the refrigerator compartment for
functional reasons.
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Taking out the glass shelf "EasyLift"
Fig. 5
Move glass shelf all the way upwards
and take out.
Taking out the door shelf "EasyLift"
Fig. 6
Move door shelf all the way upwards and
take out.
Taking out the fixed glass shelf
Fig. 7
Press buttons on the underside and
detach from the fixing.
Removing the container
Fig. *
Tilt container forwards and take out.
To insert the container, place the front
of the container on the telescopic rails
and push into the appliance.
The container is engaged by pushing it
into the appliance.
Remove telescopic rails
Fig. ,
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear
pin.
4. Push telescopic rail together, push
backwards above the rear pin
and disengage.
Installing telescopic rails
1. Place the extended telescopic
rail on the front pin.
2. Pull the telescopic rail forwards
slightly until it engages.
3. Place telescopic rail on the rear pin.
4. Push lock backwards.

Odours

If you experience unpleasant odours:
1. Switch off the appliance with the
On/Off button. Fig. 2/5
2. Take all food out of the appliance.
3. Clean interior (see chapter "Cleaning
the appliance").
4. Clean all packages.
5. Seal strong smelling food in order
to avoid odours from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation
of odours is still occuring after
24 hours.
en
27