Getting Started; Step 1: Installing The System - Sony BDV-N890W Operating Instructions Manual

Getting Started

Step 1: Installing the
System
How to position the system
Install the system by referring to the illustration
below.
A
F
C
G
D
H
A Front speaker (L (left))
B Front speaker (R (right))
C Center speaker
D Surround speaker (L (left))
E Surround speaker (R (right))
F Subwoofer
G Unit
H Surround amplifier
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a specially
treated (waxed, oiled, polished, etc.) floor, as staining
or discoloration may result.
• Do not lean or hang on a speaker, as it may fall down.
• The speaker of this set is not anti-magnetic. This may
result in color unevenness when it is placed near a
CRT TV or projector.
• You can install the speakers on a wall. For details,
refer to the supplied "Speaker Installation Guide."
16
US
Attaching the stand to the unit
(BDV-N990W only)
You can install the unit in a raised position by
attaching the stand.
1
Insert the pins of the stand in the holes
on the bottom of the unit.
B
E 2
Secure the stand with the screws.
Stand (supplied)
Screws (supplied)