Step 5: Performing The Easy Setup - Sony BDV-N890W Operating Instructions Manual

Blu-ray disc/dvd home theater system
Hide thumbs Also See for BDV-N890W:
Table of Contents

Advertisement

Step 5: Performing the
Easy Setup
Follow the Steps below to make the basic
adjustments and network settings for the system.
Displayed items vary depending on the country
model.
1
Insert two R6 (size AA) batteries
(supplied) by matching the 3 and #
ends on the batteries to the markings
inside the compartment.
2
Turn on the TV.
3
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
4
Press [/1.
5
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
24
US
6
Perform [Easy Initial Settings]. Follow
the on-screen instructions to make the
basic settings using C/X/x/c and
C/X/x/c
Depending on the connection method
(page 18), perform the following setting.
• HDMI cable connection: Follow the
instructions that are displayed on the TV
screen.
• Video cord connection: Select [16:9] or
[4:3] so that the picture is displayed
correctly.
For details about [Auto Calibration]
settings in [Easy Initial Settings], see
"Calibrating the Appropriate Speaker
Settings Automatically" (page 37).
7
After completing of [Easy Initial
Settings], perform [Easy Network
Settings]. Press C/X/x/c to select [Easy
Network Settings], then press
The Easy Network Settings display
appears.
8
Follow the on-screen instructions to
make the network settings using C/X/x/
c and
.
If the system cannot connect to the network,
see "Network connection" (page 58) or
"Wireless LAN connection" (page 58).
To recall the Easy Initial Settings
display/Easy Network Settings
display
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select
3
Press X/x to select [Easy Setup], then
press
.
4
Press X/x to select the setting, then
press
.
• [Easy Initial Settings]
• [Easy Network Settings]
.
.
[Setup].

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdv-n990wBdv-n890w/zBdv-n790w

Table of Contents