Additional Features And Notes - Impecca CM-1295ST User Manual

Convection microwave oven with grill
Table of Contents

Advertisement

Available languages

Available languages

Additional Features and Notes

END OF COOKING NOTIFICATION
After cooking has completed, a beep will sound. The system will continue to beep every two
minutes until a button is pressed or the door is opened.
CHILD LOCK
The appliance has a safety lock that prevents unsupervised operation by children. To activate
this feature, press and hold the RESET button for 3 seconds. A beep will sound and the lock
indicator light will turn on.
To turn off the lock, press and hold RESET for 3 seconds. A beep will sound again and the lock
indicator light will turn off. Normal operation can now resume.
OVEN TIMER
The oven timer is used independently of the cooking cycle and is simply a timer. To set the timer:
1. Press the TIMER button.
2. Enter the amount of time, using the number buttons. The max allowed is 99 minutes and 99
seconds.
3. Press the START button to start the timer.
NOTE: You can check the countdown time later on by pressing the TIMER button. Pressing
RESET will cancel the timer.
COOLING FAN
When cooking time exceeds 2 minutes, the oven fan will automatically engage after cooking is
finished. The fan will cool the oven for approximately 3 minutes.
SYSTEM PROTECTION FUNCTIONS
Overheating Protection: If the Microwave overheats, The system will beep, display "E01" and
enter a protection mode. When the system is no longer overheated, press the RESET button to
return to standby mode for normal operation.
Microtherm Protection: If the Microwave is too cold, The system will beep, display "E02" and
enter a protection mode. When the system is back to a normal operating temperature, press the
RESET button to return to standby mode for normal operation.
Sensor Malfunction: In the case of a short circuit, the system will beep, display "E03" and enter
into protection mode. Press the RESET button to return to standby mode for normal operation
OTHER NOTES
• Pressing STOP twice will stop cooking and erase the current program.
• If the oven beeps twice during programming, there has been an invalid entry.
• When cooking is interrupted for 1 minute, the system returns to standby mode automatically.
14

Advertisement

Table of Contents
loading

Table of Contents