Table of Contents
Advertisement
Handling the Printer Safely
Notes on Installation
DDANGER
Do not use the printer near hazardous materials.
The printer is not constructed of explosion proof material. An explosion could occur if the
printer is used in a location containing hazardous material.
Install the printer in a well-ventilated room. When installing the printer in a sealed or poorly
ventilated room, be sure to install a ventilator.
Since ink vapor is heavier than air, vents should be located as close to the floor as possible.
Long-term or repeated exposure to ink can cause organ damage.
Do not use the printer near fires.
Otherwise, a fire may occur if the ink or cleaning liquid ignite.
DWARNING
Do not use flammable sprays or solvents near the printer. Do not place them near the printer.
Otherwise, a fire or electric shock may occur.
Do not place small pieces of metal or containers with liquid such as water on or near the printer.
If metal or liquid enters the printer, a fire or electric shock may occur.
Store ink bottles in a cool, dry place.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to
humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not block the vents on the printer.
Otherwise, internal parts will overheat and may cause a fire.
To prevent children from causing accidents, do not install the printer in an environment near
children.
Otherwise, injuries could occur.
DCAUTION
Make sure you adjust the horizontal feet (adjusters) to keep the unit flat.
Using the printer while it is unstable may cause an injury or unexpected accident to occur.
5
Advertisement
Table of Contents
