Adding A Temporary E-Mail Subject; Scanning Parameters - Axis 7000 User Manual

94 Using the Document Server

Adding a Temporary E-mail Subject

Scanning Parameters

There is a list of pre-defined e-mail subjects resident within the
Document Server. If you want to send a scanned document with an
alternative e-mail subject, you can add a temporary e-mail subject
using either:
• standard PC keyboard
• standard Web browser
Follow the instructions below to add a temporary e-mail subject to
the list:
1. If the keyboard is not already connected, disconnect the
Document Server power supply, connect the keyboard to the
keyboard connector located on the rear panel, and then
reconnect the power supply.
2. When you have selected the e-mail destination and the sender of
the e-mail, press the Menu key on your Document Server. The
following prompt will appear on the message display:
Subject:
3. Enter the new e-mail subject you want to add using the keyboard,
then press Send.
Notes:
• The e-mail subject will appear in the list of e-mail subjects and can
be made permanent by the administrator. See "Specifying Destina-
tions" on page 53 for details or contact the administrator.
• You can only add one temporary e-mail subject to the list. Any tem-
porary e-mail subject will be overwritten.
From the Document Server control panel, press Menu
through the scanning menu. Use
If a keyboard is connected, press Tab and use the UP/Down arrow
keys to find the desired value or search the menu by typing the
parameter name (or the first letters in the parameter name).
AXIS 70U/7000 User's Manual
to scroll
to find the desired value.