Table of Contents
Advertisement
Chapter 8. Quick Setup
Quick Setup
To assist in configuring the DTE options for the ISU 128, ten common config-
urations are preset in Quick Setup. These include:
•
Synchronous dial operation for 56, 64, 112, and 128 kbps
•
Asynchronous dial operation for 57.6, and 115.2 kbps
•
128 kbps Leased service
•
128 kbps Limited Distance Modem using Master Clocking
•
V.34 modem service
•
Fallback 57.6
In the following descriptions, an asterisk (*) following the option indicates the option
requires ISDN switch protocol to be configured. Multipoint lines will also require
SPID1 & LDN1. See the chapter Dial Options.
Dial 56K sync*
When the ISU 128 is configured for Dial 56K sync service, the following pa-
rameters are automatically preset:
Service type....................................................................... ISDN dial line
Automatic answering ...................................................... Enabled
ISDN call type .................................................................. 56 kbps data
Data protocol .................................................................... Clear Channel
DTE mode ......................................................................... Synchronous
DTE connector bit rate .................................................... 56 kbps
DTE flow control.............................................................. none
RTS line ............................................................................. 1 ms delay
CTS line ............................................................................. Forced on
Transmit data clock ......................................................... Normal clock source
V.54 Loopbacks ................................................................ Accepted
60
ISU 128 User Manual
61202.029L2-1
Advertisement
Chapters
Table of Contents
