Tcp Ports Opened For Raw Printing; Snmp Device Index - Axis 5550 User Manual

The Parameter List

TCP Ports Opened for Raw Printing

AXIS 5500
AXIS 5550
Note:

SNMP Device Index

158
Port Number Port Via Logical Printer
9100 USB1 —
9902 USB1 —
9101 USB1 —
Port Number Port Via Logical Printer
9100 LPT1 —
9101 USB1 —
9900 LPT1 —
9902 USB1 —
9100 LPT1 —
9101 USB1 —
The TCP port numbers entered in RTEL_PRx. will override the settings in
the two tables above.
When using the TCP/IP protocol (and if the printer driver permits), the
print server can use SNMP Status to find out if the printer is ready to
accept a new job.
By default, Windows uses the value "1" when addressing an SNMP
device, which is correct for single port print servers. For a multiport print
server, obtain the SNMP Device Index from the table below.
Print Server LPR Queue Name
Single Port:
Parallel LPT1
Single Port:
USB USB1
Dual Port:
Parallel LPT1
USB USB1
Dual Port:
Parallel LPT1
Parallel LPT2
Three Port:
Parallel LPT1
Parallel LPT2
Serial COM1
Condition
DEFAULT_RAW_TCP. set to 9100
AXIS_PRINT_SYSTEM. Enabled
NDPS. Enabled
Condition
DEFAULT_RAW_TCP. set to 9100
AXIS_PRINT_SYSTEM. Enabled
NDPS. Enabled
Raw Port Number SNMP Device Index
9100 1
9100 1
9100 1
9101 2
9100 1
9101 2
9100 1
9101 3
9102 2
AXIS 5500 / AXIS 5550 User's Manual