Assign Ip Address - Axis 1650 Setup Instructions

AXIS 1650 Set-up Instructions

Assign IP Address

Install AXIS IP JumpStarter
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If auto-run is off, click on
My Computer
and click on the AXIS 1650 CD and select
[Open].
Software
3. Click the blue
4. Click the blue AXIS IP JumpStarter
5. A File Download window will appear, select
program from its current location
click [OK].
6. AXIS IP JumpStarter Setup will appear, click
[Next].
7. To install in the default destination folder, click
[Next], otherwise select another destination
folder and continue.
8. A system requirement diagnostic will run to
ensure needs are sufficient, click [Next].
9. AXIS IP JumpStarter will install, once completed be sure to check the action
shortcut to AXIS IP JumpStarter on your
link on the upper right.
link to install.
Run this
radio-button and
desktop. Click [Next], then [Finish].
Page 7
Create a