Axis 1650 Setup Instructions page 13

10 Connect to the Scanner
These sections describe how to scan via an AXIS 1650 using AXIS ScanClient. For general infor-
mation on scanning, see your Canon device manual. The examples in this section show Windows
XP and a Canon MF3110 with MF Toolbox 4.7.
AXIS ScanClient will open a channel between your computer and the scanner. The channel will
be open for five minutes to give you time to walk to the scanner and place the object to be
scanned on the flatbed. During these five minutes you have exclusive rights to the scanner (but
print jobs function as usual).
Connect to the Scanner
AXIS ScanClient
1. Start
ScanClient). The client will search the
network for scanning devices. Mark the
one you would like to use by clicking on
it in the list (you can also select a scan-
ner by entering its IP address). Click
[Connect].
2. If the scanner is busy AXIS ScanClient
will show who is using it, otherwise you
will be connected, as indicated on the
message line.
Click [Help] to get information on how to con-
nect and disconnect.
(Start | AXIS
Prepare your Computer (first time only)
1. Connect to the scanner with
Client.
Start | Printers and
2. Go to
Scanners and
3. Click on
4. Right-click the device you would like to
use (example: WIA Canon MF3110) and
select Properties.
Events
5. Select and select the event
MF3110 Scan Button.
Under Actions, select the option
this program
and select
Ver4.7
in the list.
Click [OK].
AXIS Scan-
Faxes.
Cameras.
Canon
Start
MF ToolBox