Status Led Indicator - Axis P5532 User Manual

SDHC Memory card slot - A standard or high capacity SD memory card (not included) can be used for local recording with
removable storage. To insert and remove an SD card, the camera's top cover must first be removed; for instructions please
refer to the Installation Guide.
Note:
Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to
Setup > System Options > Storage > SD Card and click Unmount.

Status LED indicator

After the startup and self test routines the Status indicator flashes as follows
Color Description
Unlit Steady during connection and normal operation
Amber Steady during system initialization and reset to factory default. Flashes during
firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost
Red Flashes red for firmware upgrade failure
Green Shows steady green for 10 seconds for normal operation after restart
See also LED Indicator flash routine, on page 47.
AXIS P5532/AXIS P5534 - Product Description
6