Hardware overview
Multi-connector
Network connector - RJ-45 Ethernet connector. Supports High Power over Ethernet (IEEE 802.3at). Use the AXIS T8123
Midspan (included). Shielded cables should be used to comply with EMC.
Control button - The control button is used for
•
Connecting to an AXIS Video Hosting System service, see page 34. To connect, press and hold the button until the
Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service, see page 34. To connect, press the button once.
•
Restoring the camera to factory default settings, see Resetting to Factory Default Settings, on page 40.
Restart button - Press the button to restart the camera.
Serial number label - Part number (P/N) and Serial number (S/N). The serial number may be required during installation.
Multi-connector - Terminal connector for connection of external equipment:
•
Audio equipment
•
Input/output (I/O) devices
•
AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the
camera's IP51 rating, see Multi-Connector Cable (not included), on page 41.
AXIS P5532/AXIS P5534 - Product Description
Part number (P/N) & Serial number (S/N).
The serial number may be required during
installation.
Network connector (High PoE)
SD memory card slot
Control button
5
Status LED
Restart button