Further Information - Axis M1054 Installation Manual

Page 20 AXIS M10 Series
5. Re-assign the IP address, using any one of the methods.
Accessing the camera from the Internet
Once installed, your AXIS M10 Series network camera is accessible on
your local network (LAN). To access the camera from the Internet,
configure network routers to allow incoming traffic, which is usually
done on a specific port:
• HTTP port (default port 80) for viewing and configuration
• RTSP port (default port 554) for viewing H.264 video streams
Please refer to the documentation for your router for further
instructions. For more information on this and other topics, visit the Axis
Support Web at www.axis.com/techsup

Further information

The user's manual is available from the Axis Web site at www.axis.com
or from the Axis Network Video Product CD supplied with this product.
Visit www.axis.com/techsup to check if there is updated firmware
available for the AXIS M10 Series. To see the currently installed firmware
version, see Setup > About in the camera's web pages.