Axis M1054 Installation Manual page 17

AXIS M10 Series
EAP-TLS
• Identity - Enter the user
identity to present to the
network
• Private key password -
Enter the password for
your user identity
• EAPOL version - Select the
version used (1 or 2) in your access point
• Certificates - Upload a CA certificate to present to the access point
for authentication
WEP
Authentication - Select Open or Shared Key, depending on the
method used by your access point. Not all access points have this
option, in which case they probably use Open System, which is
sometimes known as SSID Authentication.
Key length - This sets the length of the key used for the wireless
encryption, 64 or 128 bit. The encryption key length may also be
shown as 40/64 and 104/128.
Key type - The available key types depend on the selected access
point. The following options are available in the camera:
• Manual - Allows you to manually enter the hex key.
• ASCII - The string must be exactly 5 characters for 64-bit WEP and 13
characters for 128-bit WEP.
• Passphrase - In 64-bit WEP, the Passphrase generates 4 different
keys. For 128-bit WEP, only 1 key is generated, which is then repli-
cated for all 4 keys. Key generation is not standardized and can differ
from brand to brand. Check that the generated keys are identical to
those in your access point - if not, they must be entered manually.
Page 17