Resetting to Factory Default Settings
To reset the AXIS 231D+/232D+ to the original default settings, go to the System Options
> Maintenance web page (described in Maintenance, on page 39) or use the control button
on the AXIS 231D+/232D+ as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 231D+/232D+ to factory default settings
using the Control Button.
1. Switch off the AXIS 231D+/232D+
by disconnecting the power.
2. Press and hold the Control button
while you reconnect the power.
3. Keep the Control button pressed
until the Power Indicator flashes
amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Power Indicator changes
to green (may take up to 1 minute), the process is complete and the AXIS
231D+/232D+ has been reset.
AXIS 231D+/232D+ - System Options
Control button
Power Indicator
Network Indicator
41