Axis 231D+ User Manual page 10

AXIS 231D+/232D+ - Using the Network Dome Camera
10
The AMC viewer toolbar (AXIS Media Control) is available from Microsoft Internet
Explorer only and displays the following buttons:
The Play/Stop buttons start and stop the live video stream.
The Snapshot button takes a snapshot of the currently displayed image. The
Snapshot function and the target directory for saving snapshots can be configured
from AMC (AXIS Media Control), which is available from the Windows Control
Panel (Internet Explorer only).
Click the View Full Screen button and the video image will fill the entire screen
area. No other windows will be visible. Press Esc (Escape) on the computer
keyboard to cancel full screen view.
Click the Set emulated joystick mode button and click in the image to move the
camera in the desired direction
Click the Center button and the camera view will center on the position that was
clicked. The location to move to has a definite position, e.g. 'position x,y.
Pan/Tilt/Zoom Controls
The Live View page also displays the Pan/Tilt/Zoom controls. The administrator
can enable/disable the control for specified users under System Options >
Security > Users > User List.
Pan/Tilt/Zoom Control Queue
The time the user is in control of the PTZ settings is limited and a queue of users has been
set up. Use the buttons to request or release control of the Pan/Tilt/Zoom controllers.
The Pan/Tilt/Zoom Control Queue is set up by the administrator under:
Dome Configuration > Advanced > PTZ Control Queue. For more information on using
Pan/Tilt/Zoom controls, please see page 25.
AXIS 295 Video Surveillance Joystick
The AXIS 295 is a USB device that gives responsive and accurate control of the pan, tilt,
zoom functionality. On installation, the joystick is automatically detected by AXIS Media
Control where the 12 buttons can be programmed for a customized video surveillance
system. For more information, please visit the Axis Website at http://www.axis.com