BMW F 800 GS Adventure 2015 Rider's Manual page 121

pressing it in and turning it
counterclockwise.
Install front and rear turn
indicator light sources
Replace defective light source.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
To protect the glass on the
new bulb against contamina-
tion, always use a clean, dry
cloth to hold it; do not touch
with bare fingers.
Install the light source 1 in the
light housing by pressing it in
and turning it clockwise.
Insert inside end of lens into
light housing and close it.
Fit the screw 1.
Replacing bulb in license
plate lamp
Park the motorcycle, ensuring
that the support surface is firm
and level.
Switch off ignition.
8
119
z