BMW F 800 GS Adventure 2015 Rider's Manual page 113

Pinch bolt on quick-re-
lease axle
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Removing rear wheel
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
center stand.
Remove screw 1 and take
speed sensor out of bore.
Remove axle nut 1.
Loosen lock nuts 2 on left and
right by turning counterclock-
wise.
Loosen adjusting screws 3 on
left and right by turning clock-
wise.
Remove adjusting plate 4 and
slide axle as far as possible to-
ward inside.
8
111
z