Riding Mode - BMW R 1200GS Adventure 2015 Rider's Manual

Release button 1 within two
4
seconds.
ASC warning light contin-
64
ues to light up.
The ASC function is switched
off.
Activate ASC function
z
Press and hold button 1 until
the ASC warning lamp's display
changes.
The ASC warning light
does not light up anymore;
if self-diagnosis has not been
completed, it begins to flash.
Release button 1 within two
seconds.
The ASC warning light still
does not light up respec-
tively continues flashing.
The ASC function is switched
on.
As an alternative, the ignition
can also be switched off and
then on again.
NOTICE
If the ASC warning light lights
up after switching the ignition
off and on and then continued
driving over 4 mph (5 km/h), an
ASC error has occurred.
NOTICE
More detailed information on the
BMW Motorrad Automatic Stabil-
ity Control (ASC) system can be
found in the section "Technology
in detail".

Riding mode

Use of the riding modes
BMW Motorrad has developed 5
riding scenarios for your motor-
cycle from which you can select
the one matching your situation:
Riding on wet roads
Riding on dry roads
with Pro riding modes
Brisk riding on dry roads
Moderate off-road riding
Challenging off-road riding
For each of those 5 scenarios,
the optimum balance between
engine torque, throttle response,
ABS control and ASC control for
the situation concerned is pro-
vided.
OE