Jump-Starting - BMW R 1200GS Adventure 2015 Rider's Manual

7
134
Attach air cleaner housing
cover.
Install screws 1.
z
Place fuel tank cover 1 in
position, taking care that the
guide arrowed is underneath
the upper front-wheel fairing 2.
Install screws 1, 2 and 3.
Close stow compartment lid 4.
Install rider's seat (

Jump-starting

ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the vehi-
cle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle.
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
80).
Jump-starting with a voltage
higher than 12 V.
Damage to the motorcycle's
electronics.
The battery of the donor ve-
hicle must have a voltage of
12 V.
Park motorcycle, ensuring that
support surface is firm and
level.
Remove battery cover (
Do not disconnect the battery
from the onboard electrical sys-
137).