Overview; Rtp / Mpeg-4; Bonjour; Ports & Devices - Axis 211W User Manual

RTP / MPEG-4

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for
the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should be used for
multicast streams. For more information, please see the online help.

Bonjour

The AXIS 211W includes support for Bonjour. When enabled, the camera is automatically detected by operating
systems and clients that support this.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector
are described in I/O Terminal Connector, on page 37.

LED Settings

The Network Indicator LED can be enabled or disabled, according to requirements and the Status indicator LED
can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing
of all LED behavior, see page 7.
Note that the Status LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

•Restart - The camera is restarted without changing any of the settings.
•Restore - The unit is restarted and most current settings are reset to factory default values. The settings that
will not be reset are as follows:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the wireless settings
•Default - The default button should be used with caution. Pressing this will return all of the camera's settings
to the factory default values (including the IP address).
Upgrade Server - See Upgrading the Firmware, on page 41.
Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. If necessary,
it will then be possible to return to the previous settings, if settings are changed and there is unexpected
behavior.
Restore - click the Browse button to locate the saved backup file (see above) and then click the Restore button.
The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configuration
of multiple units or for firmware upgrades.

Support

The Support overview page provides valuable information on troubleshooting and contact information, should
you require technical assistance.
System Overview - is a quick look at the camera's status and settings. Information that can be found here
includes the camera's Firmware version, IP address, Security, Optional Network Services, Event Settings, Image
settings and Recent log items. Many of the captions are also links to the proper Setup page to conveniently
make adjustments in the camera's settings.
AXIS 211W - System Options
34