Html Examples; External Video; Sequence Mode - Axis 211W User Manual

AXIS 211W - Live View Config

HTML Examples

You can add live video from the camera to your own web site. The camera can transmit a Motion JPEG or
unicast MPEG-4 stream to up to 20 simultaneous connections, although an administrator can restrict this to
fewer. If multicast MPEG-4 is used, the video stream will be available to an unlimited number of viewers
connected to the parts of the network where multicast is enabled. Please note that a separate MPEG-4 license is
required for each viewer.
Enter the Video Format, Image Type, Image size and other settings to suit your web page and click Update. The
camera then generates the required source code for your configuration. Copy this code and paste it into your
own web page code.

External Video

The camera can also display video images from other Axis network cameras and video servers, directly on the
Live View page. These are known as External Video sources. These external video sources are available from
the drop-down list on the Live View page.
Click the Add button to open the External Video Source Setup dialog, which is used to make all the necessary
settings. Enter the IP address or host name of the external video source you wish to add. Depending on the
external source, select either MPEG-2, MPEG-4 or Motion JPEG as the type of video stream to receive.
Example of a path to an external video source:
http://192.168.0.125/axis-cgi/mjpeg/video.cgi

Sequence Mode

The Live View page can be configured to cycle through the internal and selected external video sources, in
order, or at random.
Select the desired video sources and enter the time in seconds to display each source (up to 59 minutes).
Click Save.
The Sequence buttons that appear on the Live View page are used to start and stop the sequence mode.
Please see the online help for more information.
22