Siemens SIMATIC Manual page 39

The pin-out below shows only the connections relevant for the respective positio-
ning mode. The other connections are found in the Manual, Chapter "Wiring".
CONNECTOR X2:
Pin Name/Address
1 1 L+
2 DI+0.0
3 DI+0.1
4 DI+0.2
5 DI+0.3
6 DI+0.4
20 1 M
31 3 L+
32 DO+1.0
33 DO+1.1
34 DO+1.2
35 DO+1.3
40 3 M
2nd step: Installing a sample project
You have two options of installing a sample project:
From CD:
Step Action
1 Double-click on SETUP.EXE in the SETUP fol-
der of your CD.
2 Follow the on–screen instructions.
Download from the Internet:
Step Action
1 Open the sample project directory. Double-click
on SETUP.EXE.
2 Follow the on-screen instructions.
Automation System S7-300, Getting Started – Digital
A5E00105533-01
Function
24 V supply voltage for the inputs
Encoder signal A
Encoder signal B
Encoder signal N
Length measurement
Reference-point switch
Chassis ground
24 V supply voltage for the outputs
Digital output Q0
Digital output Q1
Digital output Q2
Digital output Q3
Chassis ground
Result
The installation program starts.
Result
The installation program starts.
5