Turning On For The First Time - DeLonghi KENDRA Instructions Manual

TuRNING ON FOR ThE FIRST TImE

After inserting the batteries, set the day of the week and
time.
Adjust the day of the week by using the "+"
and "-" keys (1=MON, 2=TUE,...7=SUN), then
confirm by pressing the "Mode" selection
key.
The hour starts flashing. In the same way, ad-
just the hour by using the "+" and "-" keys and
confirm with "Mode" selection key.
Repeat the same procedure for the minutes.
ON/STaNDBy mODE
In "Standby" mode the current time and the
EN
day of the week appear on the display.
All the operating modes are suspended ("Pilot
Wire" included), but the appliance is powered
and waiting for command reception.
To turn the appliance on or off, press the
"Standby" button.
The radiator turns on in the previously selec-
ted operating mode and emits a sound.
When first using the remote after replacing
the batteries, the "Comfort" mode is selected.
The entry into "Standby" mode is signalled by
means of a double beep, the exit from "Stan-
dby" mode by means of a long beep.
ImPORTaNT: After using the "Standby" button on the side
control panel, the appliance ignores all orders transmitted
by the remote control other than "Standby" and emits three
beeps to indicate the error.
OPERaTING mODES
The appliance provides 5 operating modes
which allow the user to heat the environment
in the most suitable way with respect to his
needs.
Press the "Mode" selection key to select the
desired operating mode. An icon on the LCD
will show the selected operating mode.
Pilot Wire
Night/Eco
Chrono
Comfort
Anti-freeze
52
"Chrono" mode offers various functions (preset program-
mes) in addition to those accessible from the control panel.
All other modes have the same characteristics.
ImPORTaNT!
The "Overdrive (2h)" and "Fan Heater" functions are
obtained by pressing the corresponding buttons on
the remote control.
The "Fan Heater" function is available only for the
towel rails with integrated fan heater.
It is not available on this appliance. If the "Fan Hea-
ter" command is given on the remote control, the
appliance confirms the reception of the signal and
remains in the previously selected operating mode.
chRONO
In "Chrono" mode, you can select one of the three preset
chrono-thermostat programs or the custom program. The
latter lets you set various temperatures ("Comfort" and "Ni-
ght/Eco") over a 24 hour period for each day of the week.
chOIcE OF PROGRam
Press the "Mode" button until the icon
displayed. Then press the "Mode" and "-" but-
tons together and hold them both down for at
least 3 seconds.
The program code (P1, P2, P3 and P4) flashes.
Press the "+" and "-" buttons to set the pro-
gram. Press the "Mode" button to confirm.
PROGRam P1
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
is
HOURS MODE
0 - 6 Night/Eco
6 - 9 Comfort
9 - 16 Night/Eco
16 - 23 Comfort
23 - 0 Night/Eco
0 - 7 Night/Eco
7 - 23 Comfort
23 - 0 Night/Eco