General Information - DeLonghi OTTAVIO User Instruction Manual

1. SPECIFICATIONS OF THE APPLIANCE
Voltage: 230 V~ 50 Hz
GB
Insulation class: II
Protection class: IP24
Power [W]
Rated current [A]
Table 1
The appliance's technical specifications are indi-
cated on the rating plate located on one of the col-
lectors on the towel warmer (Fig. 1).
A Brand/Manufacturer
B Model, type, category
C Bidimensional Code (QR)
D Protection class
E CE marking

2. GENERAL INFORMATION

Unpack the appliance carefully and rest it on a soft
support to avoid damage.
The package contains:
– the appliance disassembled
– mounting kit
– instructions
– assembly instructions
Read all the instructions carefully before installa-
tion and use. Keep for future consultation.
Install and use the appliance as described in these
instructions only.
These instructions do not cover all situations
which might arise. Caution and common sense
should be applied when installing, operating and
servicing the appliance.
Modifying the characteristics of the appliance and
removing any fixed component including the caps is
expressly prohibited (fig. 2).
Make sure the appliance and its components are
complete. If the appliance and its components are
damaged, do not use them, rather contact your lo-
cal dealer or a qualified professional. Pay special
care to the wiring.
60
0.3
F Double insulation
G Disposal procedures
H Quality marks
I Voltage and Power
L Serial Number
Do not damage, cut or scratch the heating cable.
Follow the assembly instructions scrupulously.
Do not use the individual components improp-
erly or outside of the assembled appliance.
Make sure that all of the components are available
before assembling the appliance, otherwise contact
the service centre. Do not assemble the appliance
without using a complete kit.
Before wall-mounting or powering the ap-
pliance, make sure the towel warmer is com-
pletely and correctly assembled following the
assembly instructions.
Once the appliance has been installed, the blocks
can be moved along the manifold without affect-
ing the structure's solidity.
For any repairs to the appliance, contact a quali-
fied professional.
The materials used for packaging can be recy-
cled. You are therefore recommended to dispose
of them in special differentiated waste collection
containers.
3. POSITIONING AND INSTALLING
WARNING:
This appliance is designed to dry towels washed in
water only. It must not be used for other purposes.
The appliance must be used permanently mount-
ed on a wall as described in the instructions.
Install the appliance with the switch facing down-
wards on the right as in Fig. 3.
In bathrooms (with bath or shower), install the ap-
pliance outside zone 1.
The appliance must be installed in such a way that
the switch, the electronic controller and other con-
trol devices cannot be touched by someone in the
bath or shower.
8
300
1.3