AT&T Merlin Legend 10BS Quick Reference page 4

BRI Access Button Quick Reference
With the Recall feature, you can automatically
place a call to the last telephone number called
from a BRl Personal Line without manually
redialing the number,
Procedure
Follow these steps:
1. With the telephone receiver off-hook, press
the Personal Line button.
The Personal Line green LED lights,
You receive a dial tone,
Proceed to step 4.
4. Dial the
to activate the Recall
feature code
feature, The telephone number from which the
last call was received on the BRI line is
automatically dialed by the CO.
— If the telephone number being called is
available, you hear ringback. Identify
yourself to the party called.
— If the number is busy the CO "camps" or
queues the call at the called number When
the number is available, the CO calls you
back on the BRI line used to place the call.
All telephones sharing the Personal Line
button ring with a priority ring (four-burst
ring for MLX sets; three-burst ring for
analog multiline phones) to indicate the
completed call.
If more than one BRI line is assigned as a
Personal Line button and you do not know
which Personal Line button was used to make
the last call, follow steps 2 and 3:
2. If you telephone is an MLX( display set, press
the BRI Access button, You receive the
display: Dial 4 for In; 6 for Out. Dial 6 which
represents the letter "O" for outgoing calls,
The red LED moves to the last Personal Line
button used to make an outgoing call
(excluding calls made on a BRI Access button
to initiate a CO-based transfer).
The green LED next to the BRI Access Button
goes off.
3. Lift the receiver, or if the telephone is
equipped with a speakerphone, press the
Speakerphone button.
The green LED lights,
You receive a dial tone,
Proceed to step 4.