Planning And Modifying A Route; Planning A Route From A To B - AvMap Geosat 6 User Manual

6. Planning and modifying a route

6.1 Planning a route from A to B

If you are in the car and you are receiving a valid GPS
signal, the point of departure corresponds to your GPS
position. Nevertheless it is always possible to plan a route
even without GPS signal, before departing, by entering
both the departure point and the destination point.
• Enter the address by following the procedure described
in paragraph 4 up to the Start Navigation page.
• In the Start Navigation page you can set the entered
address as a departing point by pressing Set as
Departure. A page will open up asking "Do you want to
set a destination now?"
• Press Yes, the Where to Go Page will open.
• Repeat the procedure to enter the destination.
On the Start Navigation page click on the chequered flag
icon to Set as Destination and calculate the route. The
map will be displayed.
34 - AvMap