Select Approach For Goto - AvMap GeoPilot II PLUS User Manual

> 'MENU' + 'MENU' + "FLIGHT PLAN" + 'ENT' + 'MENU' + "CHANGE APPROACH"
- select the approach + 'ENT'.
This will substitude the previous approach including the waypoints on the moving map for the new
approach and add the new waypoints to your flight plan and the moving map.
To remove desired approach
> 'MENU' + 'MENU' + "FLIGHT PLAN" + 'ENT' + 'MENU' + "REMOVE APPROACH"
+ 'ENT'.

9.3 SeleCT APProACh for GoTo

If a 'GOTO' to an airport is active, pressing "GOTO" from the map will display the GOTO menu
(regardless of your cursors position).
If an approach to the destination airport is not yet selected (the approach has to be present in the
Jeppesen® database), the "GOTO Menu" will display "Select Approach".
If an approach is already selected, the "GOTO Menu" will show the options: "Change Approach"
or "Remove Approach".
Selecting "Select Approach" or "Change Approach" will open a new window with available
approaches for the destination airport.
After selecting the desired approach, the Geopilot II Plus will remove the GOTO destination airport
and replace it with the approach waypoints. The 'GOTO' destination is now the first approach
waypoint.
The Geopilot II Plus will take you to the first point of the approach, and after passing through
this point automatically, will go to each of the other points of the approach. Selecting "Remove
Approach" removes the approach waypoints from the GOTO destination replacing them with the
corresponding airport waypoint (that was originally selected).
Activating a GoTo with an Approach from database
If you are in the airports database page
> 'MENU' + 'MENU' + "DATABASE" + "AIRPORTS"
and the screen is displaying approach information, by pressing 'GOTO' you will activate a 'GOTO'
to the selected airport and automatically opened the "Select Approach" window.
If you don't want to select any approaches just press 'ESC'.
54