Getting Started; Setting The Clock - Oster LMX Series User Manual

GETTING STARTED

Unpack your Coffeemaker
1. Unpack your coffeemaker and remove plastic bags, cartons and any
tape on the unit.
IMPORTANT: KEEP PLASTIC BAGS AWAY FROM CHILDREN.
Clean Coffeemaker Before Use
Just follow these simple steps:
1. Remove the carafe 2. Move switch
(dishwashable) from toward unlock icon
the coffeemaker. to separate
removable top
half from the base
of the coffeemaker.
4. Remove lid 5. Rotate the
(dishwashable) showerhead in
from top half of the order to remove
coffeemaker. the brew basket.
WARNING: Do not
NOTE: For thorough
let the coffeemaker's
cleaning of the
showerhead extend
showerhead, open up
beneath the dishwasher
the showerhead.
rack. The showerhead
should not make
contact with the
spray arms.
7.
3. Remove
removable top half
(dishwashable) from
the base of the
coffeemaker.
6. Remove brew
basket (dishwashable)
and place all four
dishwashable
components in
dishwasher.
CAUTION: The
electrical base, power
cord, and plug are not
dishwasher safe and
should not be
immersed in water or
other liquids.

SETTING THE CLOCK

Plug in the coffeemaker and set the current time using the hour and minute
buttons. 5 seconds of inactivity will set clock at time selected.
ADVANCED WATER FILTRATION
(Not included with all models)
The improved 2-step advanced water filtration system reduces impurities
like chlorine and calcium to make coffee taste better.
1. Soak the advanced water filtration cartridge in cold water for 5 minutes.
2. Rinse the soaked cartridge for about 1 minute.
3. Open bottom hatch where the cartridge goes and insert a new
Advanced Water Filtration cartridge. (Figure 1)
4. Close the hatch and place system in designated slot in water reservoir.
(Figure 2)
5. After 30 days (or 30 uses), replace the Advanced Water Filtration
cartridge. Cartridges can be purchased online.
NOTE: When cleaning the coffeemaker, be sure to remove the Advanced
Water Filtration holder and cartridge.
AM
PM
(Figure 1) (Figure 2)
8.