Installing The Bagger Top - Toro 79395 Operator's Manual

5

Installing the Bagger Top

Parts needed for this procedure:
2 Grass Bag
1 Upper bagger tube
Procedure
1. Install the bagger top to the bagger frame.
2. Rotate the bagger top to align the key holes in the
bagger top brackets with the keys in the posts on the
bagger frame (Figure
3. Slide the brackets over the posts and rotate the bagger
top down to the operating position.
Note: The bagger top is easier to install if 2 people
work together.
1
2
3
4
Figure 21
1. Bagger top
2. Bagger frame
3. Key hole
21).
5
6
G014888
4. Bracket, bagger top
5. Key
6. Post
4. Lift the bagger top and install the bags by sliding the
bag frame hooks onto the retaining brackets
22).
3
1. Bag
2. Bagger frame
5. Lower the bagger top onto the bags
6. Secure the hood with the latch
7. Install the upper bagger tube by inserting the curved
end into the opening in the bagger top.
Note: Make sure the flared end with the retention
post is pointing down and froward in preparation to be
mated with the Finishing Kit.
12
1
2
4
Figure 22
3. Retaining bracket
4. Bag frame hook
(Figure
Figure 23
(Figure 23).
(Figure
23).