Your Transmitter; Arming The System - Active; Arming The System - Passive (Automatic) - Audiovox PRO9675FT4 Owner's Manual

Your PRO-9675FT Remote Start Alarm System has many features and available options some
of which are selected at time of installation. For your reference, the list on page 7 of this
manual shows what features and options have been installed. Consult your installing dealer
for options that may have been installed and are not listed.

YOUR TRANSMITTER:

The transmitter shown, and included with your remote start security system, makes use of
Icons to represent the function of each transmitter button. The Closed Lock/Open Lock Symbol
button of the transmitter will arm and disarm your security system. If the optional
lock and unlock feature has been installed, your vehicle doors will lock when
arming and unlock when disarming.
The Open Trunk/Key symbol button of the transmitter will operate the ( Optional)
electric trunk release of your vehicle while a double press of this button will
operate the remote start function.
The Option button of the transmitter can be used to conrtol a variety of acces-
sories available for your vehicle. Consult your installation center for options that
may have been installed or that are available to you.

ARMING THE SYSTEM - ACTIVE:

1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk.
2. Press and release the Lock/Unlock button of your key chain transmitter one time.
The parking lights will flash once, the siren will chirp once, and the dash mounted LED will begin
to flash slowly confirming the system is armed. If you have the optional door lock/unlock circuit
installed, the doors will lock.
Note: If the siren chirped three times, then you have left a door, hood, or trunk ajar. Simply
closing that opening will provide full protection. If your vehicle has delayed interior
lighting, you may also get three chirps when arming. Once the light turns off, you will hear
one chirp confirming full arming. If the siren did not sound when arming, then the
chirps have been turned off. Refer to the section on "Eliminating the Arm/Disarm
Chirps" shown later in this manual.
SILENT ARMING - ACTIVE:
1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk.
2. Press and hold the Lock/Unlock button of your key chain transmitter for two seconds.
The parking lights will flash once, and the dash mounted LED will begin to flash slowly
confirming the system is armed. The siren will not chirp. If you have the optional door
lock/unlock circuit installed, the doors will lock.
Note: If the siren chirps three times, then you have left a door, hood, or trunk ajar. Simply
closing that opening will provide full protection. If your vehicle has delayed interior
lighting, you may also get three chirps when arming. Once the light turns off, you will
hear one chirp confirming full arming.

ARMING THE SYSTEM - PASSIVE (AUTOMATIC)

If the passive arming feature has been selected:
1. Turn the engine off, exit the vehicle, and close all doors, hood and trunk.
The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming
timer has begun. If the LED does not begin to flash rapidly, then you have left a door, hood, or
trunk ajar. Closing this entry point will allow the arming cycle will begin. If any entry point is
opened during the 30 second arming cycle, arming will be suspended. When all entry points
are closed, the arming cycle will begin again.
Page 2
128-5370
2 of 8