Rack Shelf Mounting - Extron electronics XPA Ultra Series User Manual

Figure 2.
5. Insert the amplifiers into the rack and align the holes in the rack ears with the holes in
the rack.
6. Secure the amplifiers to the rack using four provided 10-32 3/4" screws (see figure 3,
)
3
Figure 3.

Rack Shelf Mounting

The XPA U 3502 can be mounted in a shelf using the optional RSU 129 1U Universal Rack
Shelf Kit.
Mount the amplifier with the shelf as follows:
1.
If the rubber feet are installed on the bottom of the amplifier, remove them.
2. Place the amplifier on one half of the rack shelf.
3. Align the front of the amplifier with the front of the shelf, and align the threaded holes on
the bottom of the amplifier with the holes in the rack shelf.
4. Attach the amplifier to the rack shelf with the two provided 4-40 x 3/16" machine
screws. Fasten them into diagonally opposite corners by inserting the screws from the
underside of the shelf.
ATTENTION:
•
•
Installing XPA U 3502 Bridge Plate
Secure Connected XPA U 3502 Amplifiers to Rack
Using screws longer than 3/16" will damage the unit and void the warranty.
L'utilisation de vis plus longues que 3/16" endommagera l'unité et annulera la
garantie.
XPA U 3502 • Installation 6