Omron CJ Series Connection Manual page 61

●Internal memory
These addresses are used to operate this program only.
Address Data type
5000.01 BOOL Local_PMCRExecuting
5000.04 BOOL Local_PMCRNormalEnd
5000.05 BOOL Local_PMCRErrorEnd
5000.06 BOOL Local_DestinationDevice
Error
5000.07 BOOL Local_PMCRErrorCode
5010 UINT Local_ControlWord1
5011 UINT Local_ControlWord2
5012 UINT Local_PMCR_ErrorCode
5020 UINT Local_FirstSendWord
5500 UINT Local_FirstReceiveWord
Variable name
Indicates the PMCR instruction execution status.
Turns ON when the PMCR instruction is being
executed, and turns OFF when the PMCR instruction
is not executed.
Turns ON when the PMCR instruction ends normally.
Turns ON when a communications error (such as a
transmission error) occurs.
Turns ON when a Destination Device error occurs.
Turns ON when a PMCR instruction error (either of
the following three errors) occurs.
(1) Sequence No. error
(2) Data read/write area exceeded error
(3) Protocol data syntax error
Execution parameter of PMCR instruction
Execution parameter of PMCR instruction
Stores an error code when a PMCR instruction error
occurs.
Sets the number of send message words of the
PMCR instruction.
Stores the number of message words received from
Destination Device.
9．Program
Description
58