ECS P4ITA2 Manual page 31

Use this item to enable or disable the onboard
Onboard
LPT1 parallel port, and to assign a port address.
Parallel Port
The Auto setting will detect and available ad-
dress.
Use this item to set the parallel port mode. You
Parallel Port
can select SPP (Standard Parallel Port), ECP (Ex-
Mode
tended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Use this item to assign a DMA channel to the
Parallel Port
parallel port.
DMA
Onboard IDE Use this item to enable or disable either or both
of the onboard Primary and Secondary IDE
channels.
Use this item to assign IRQ to the parallel port.
Parallel Port
IRQ
This item enables or disables the AC'97 audio
AC'97 Audio
chip.
Controller
This item enables or disables the AC'97 modem
AC'97 Mo-
chip.
dem
Controller
Use this item to enable or disable the onboard MIDI
OnBoard
port, and to assign a port address.
MIDI Port
Use this item to assign IRQ 7 to the parallel port.
MIDI Port
IRQ
This item enables or disables the I/O address for
OnBoard
the game port.
Game Port
Use this item to select the USB ports or disabled.
USB Func-
tion
Enable this item if you plan to use the USB ports
USB Func-
on this mainboard in a DOS environment.
tion for DOS
27