6088 (RM218)
Baseband Description and Troubleshooting
Accessories
The Thumper supports the following accessories.
The pin out on the Thumper connector is as follows:
• DC Charger Input
• USB port
Green
• Headset Jack
You can perform the following in Thumper accessories:
• Charging
• Audio interface headset microphone and receiver (earpiece)
• Data access
Charging
This mobile terminal supports AC-3/AC-4, DC-4 ,AC5 ACP-12 and AC-1chargers
and be connected through this interface.
Headset Detection
The mobile terminal supports Nokia standard 2.5mm mono headset. The headset
insertion to the mobile terminal is detected through pin 5 of the headset Jack, J701.
JACK_SENSE_N signal is low when headset is not inserted. It becomes high when
headset is inserted.
Page 24
© 2006 Nokia Corporation
Figure 20: Pop-port bottom connector pin out
Blue
Purple
Company Confidential
Issue 1 10/2006