Aux Function - Audiovox FPE1505DV Operating Manual

AUX Function

AUX Function
This unit is equipped with an AUX input, which will allow you to enjoy programs from external
sources. After connecting an external AV signal such as a VCR, camcorder, game player etc.
Press the source button on the remote control to select the AUX input and start viewing the
external source
Picture Parameter setup
Press the SCREEN SETUP button once on remote control to enter picture setup menu. The
following menu will be displayed:
Use the ▼, ▲ button to move cursor to the item you want to set (Bright, Contrast, Saturation, Hue
and Sharpness).
Use the ►, ◄ button to set the desired values.
Press the "OK" button on the remote control and exit from the setup menu.
General Setup
Press the SCREEN SETUP button on the remote control three times to enter the general setup
menu.
Use the ▼, ▲ button to highlight the item you want to change.
Use the ► , ◄ button to set the selected item to desired mode of operation
Select Language and press the ►, ◄ buttons to select desired language.
Select RESET and press the ►, ◄ buttons to restore the default status.
Select CAPTION V-CHIP SETTING, refer to the TV function paragraph which explains in greater
detail about setting these items.
PICTURE
►BRIGHT
CONTRAST
SATURATION
HUE
SHARPNESS
GENERAL
►LANGUAGE ENGLISH
RESET
CAPTION
V-CHIP SETTING
NTSC-358 60Hz
- 22 -
050
060
070
050
002
OFF