Preparation Of Remote Control - Audiovox FPE1505DV Operating Manual

Remote Control

Preparation of Remote Control

Insert the batteries with the positive (+) polarity
facing up when looking at the back of the
remote..
1. Remove the empty battery receptacle.
2. Remove the film from the battery.
3. Insert the battery into the receptacle and
insert the receptacle into the remote.
4. Under normal use the battery will last for six
months.
5. Remove the battery when the remote is not
going to be used for a long period of time.
Using of Remote control
Use of the remote control must be at a distance
less than or equal 7m and within a 60 degree
angle of the sensor located on the front of the
unit.
The operating distance may vary depending
o n the surrounding brightness.
Notes:
Do not point bright lights directly at the
remote control sensor.
Do not place objects in front of the unit's
remote sensor and the remote control
Do not use the remote control to
simultaneously operate other equipment.
- 11 -