Audiovox D1210 Owner's Manual page 11

D. Car Installation
On the seat back (Refer to Figure 2)
Top Rings
Mounting
Bag
Lower Rings
1. Take the unit and the mounting bag from the storage bag.
Slide the unit into the mounting bag, fasten the buckle and
tighten the straps and on the side of the bag.
2. Unfasten the velcro on the rear stand off flap on the rear of the
bag. Fold the rear stand off flap to form a triangle and attach
it's end Velcro strap to the middle Velcro strap on the back of
the bag.
3. Take one of the supplied straps from the storage bag and
connect the latch to one of the top rings. Loop the strap
around the headrest. Attach the "S" hook to the other top ring
on the other side of the bag.
4. Take another strap and connect the latch to the lower ring on
the mounting bag. Attach the "S" hook to the same ring after
looping the strap around the rail located beneath the seat
track. Avoid moving parts in the seat mechanism. Repeat
this process for the other side. In some vehicles, it may be
necessary to attach the "S" connector to the rail directly, as it
may not be long enough to reach back to the ring.
5. Adjust all the straps tightly so that the bag is secure.
6. Plug one end of the cigarette lighter adapter into the DC 12V
input; then plug the other end into the cigarette lighter socket
on the dashboard.
Figure 2
11