Scan Operation; Keypad Lock - Audiovox GMRS-2000 Owner's Manual

- At the right side of the unit, select the desired VOX sensitivity level by
setting the VOX switch to LO, MID or HI position.
- Momentarily press the VOX button to discontinue the VOX mode.
NOTE: When the unit is transmitting in the VOX mode, no functions
on the unit will operate. To regain control of the functions, it
may be necessary to reduce ambient noises.

Scan Operation

This feature allows you to monitor all channels and tone codes (CTCSS)
automatically for valid signals. When the unit is in the scan mode, a re-
ceived signal will be audible for 10 seconds before the unit resumes chan-
nel scanning. To remain on a particular channel, press the SCAN or the
PTT button.
The weather alert function will be disabled in when the unit is in the scan
mode.
To enable the channel scan mode:
- From GMRS standby mode, momentarily press the SCAN Button;
(SCAN) will appear on the LCD display.
The radio will display each channel (1-15) in order as the scan mode
operates to find an active main channel.
- To exit the scan mode, press the SCAN button momentarily and the
unit will return to normal operation; (SCAN) icon will disappear from
the LCD display.
Key Pad Lock
This feature prevents accidental change to the preferred settings of the
unit. The Key Pad Lock function temporarily disables all buttons except the
PTT, CALL and Monitor Buttons.
To lock or unlock the Key Pad:
- From the GMRS standby mode, press and hold the SCAN button for
over 2 seconds to Lock the Key Pad; the (
on the display.
) icon appears
11