Battery Installation; Battery Saver Mode - Audiovox FR-114-2 Owner's Manual

BATTERY INSTALLATION

Your FR-114-2 requires four "AAA" alkaline cells. Alkaline
batteries will provide the best performance from your
transceiver. Remove the battery cover by rotating the belt
clip away from the battery compartment. Remove the
battery cover by releasing the clasp at the bottom of the
compartment. Slide the battery cover downward. Observe
the polarity symbols inside the battery tray when installing
the batteries.
CAUTION:
Incorrect battery installation can damage the unit.

BATTERY SAVER MODE

Your FR-114-2 has a unique circuit designed to dramatically extend the life of
its batteries. After five seconds of inactivity, the FR-114-2 will switch to battery
saver mode and the display will turn off to conserve battery life. While in
battery saver mode, the transceiver will remain ready to receive any incoming
transmissions. Pressing any of the buttons will exit the battery saver mode
and illuminate the display.
-7-