Battery Installation - Audiovox GMRS-WP1 Owner's Manual

BATTERY INSTALLATION

CARRY CLIP
MOUNTING
STUD
+
BATTERY
COVER
Your GMRSWP1 requires four "AAA" cells. Alkaline batteries will provide the
best performance from your transceiver.
CAUTION: Incorrect battery installation can damage the unit.
Never attempt to charge alkaline batteries.
1.Press down on the spring latch securing the clip to radio and slide the
clip downward and away from the mounting stud.
2.At battery cover, press downward with thumb on embossed arrow and
slide battery cover down and off the radio.
3.Insert four "AAA" batteries. Position batteries according to polarity
markings. Reverse the procedure outlined in steps 1 and 2 to reas-
semble.
NOTE: Make sure the battery + and - terminals are aligned as shown.
EMBOSSED
ARROW
+
+ +
-7-
SPRING
LATCH
CARRY
CLIP
128-6739
7 of 16