Nmea - Nexus FDX-kit Installation And Operation Manual

English NexusRace SW
Use NMEA Navigation
If you want to use a NMEA navigation (connected to the NMEA input), you have to tick
this box. The navigation data (Bearing and Distance to WP, XTE etc.) will then
transmitted by the Server on the Nexus Network to all connected instruments.
After you have changed this setting, you have to restart the system
Allow WPL (Waypoint Location) in
If this box is ticked, waypoints transmitted from the Navigator will be received by the
system
Send WPR (Waypoint Location)
If this box is ticked, waypoints will be transmitted via NMEA out
7.5.2

NMEA

This setting is controlling the NMEA out-put from the Server. Note, it will not affect what
is transmitted on the NX2 Race SW virtual port. The Server is able to transmit 16
sentences which will take about 2 second. You may select which NMEA sentences to
send in each box. If you want one type of data to be send more often than 2 sec, select
it twice.
46