Safety Switch; Nmea Connections - Nexus Autopilot R-1600 Installation And Operation Manual

AUTOPILOT
R-1600
9.4.4

Safety switch

Important! An external safety switch or circuit breaker (relay) (not supplied) should be
installed in line with power input. Make sure it is rated greater than or equal to 25 Amps.
This switch will serve as your Autopilot ultimate safety OFF switch.
9.4.5

NMEA connections

NMEA input from GPS Navigators etc. can be connected to Course Processor terminals
9 (data) and 10 (ground). For NMEA input, the overall shield should be terminated at
the external unit, and not at the Course Processor.
NMEA output from Compass transducer can be taken from Course Processor terminals
11 (data) and 12 (ground). For NMEA output, the overall shield should be terminated at
the Course Processor, and not at the external unit.
8-37
English